Exhaust fab!

So today the boys fabbed the exhaust. With a set of pre bent bends bought, they set off to work. 

A cut down baffle was welded in to the original header to the joint that Haynes & Scott made. 

As a high level exhaust was wanted, a lot of ideas were thrown about. Then both decided it would look sweet coming through the mudguard. Yes through it! So a section was cut out to clear room for the pipe. Another baffle was also put in between bends. 

So here she is all her formed glory! A neat little bend down of the last section of pipe was kept too. 

Next up, odds and sods!